
TIGER HORIZONTAL PLATE CLAMP - CPH Ref: 240-2
TIGER HORIZIONTAL PLATE CLAMP - CPH Ref: 240-2
The Tiger CPH clamp is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontally. They can be used to lift all types of materials in plate form providing that the plate can withstand the forces imposed on it. These clamps are only suitable for lifting single plates with a surface hardness below 300 Brinell (HB) / 32 Rockwell C (HRC).
*The capacities shown in the table are based on a set of two clamps.
Product Code |
Capacity* (tonne) |
Dimensions (mm) |
Net Weight (kg) |
|||||
Jaw Opening C (mm) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
|||
CPH-0050 |
0.5t |
0-35 |
140 |
65 |
38 |
20 |
16 |
2.3 |
CPH-0100 |
1.0t |
0-60 |
180 |
80 |
68 |
25 |
16 |
5.8 |
CPH-0200 |
2.0t |
0-60 |
180 |
80 |
68 |
25 |
16 |
6.7 |
Certification
Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.